How are you hustlers doing? In today’s guide we’ll be discussing how you can skim cards yourself and become one of our Vendor in 2023 (or use them yourself) we pay top $$$ to our vendors for their hard work as we have a list of very keen buyers looking for quality dumps + pins.
This guide was given to us by one of our most prolific skimming gang vendor that provides us with CC data dumps with Track 1 + Track 2 + PIN at hack2world.com
Furthermore we’re going to boldly state that skimming is the most lucrative fraud you can do by yourself. If you have the right equipment and the courage then you can make hundreds of thousands of dollars in untraceable cash in a single year, guaranteed.
The risk of getting caught is somewhat moderate (a little above low in 2023) but if you use common sense, and that’s what we are setting out to address, along with a few tips, so you can stay one step ahead of the authorities, so here it goes:
First and foremost, before you do anything, you need to find the right machine. This machine should be in an area where you can watch it without looking awfully suspicious.
If you don’t have access to pinpad overlays then you’re going to have to use a panel. In this case you’re going to need a machine where the top (usually where the banks logo is) protrudes enough so the pinhole from the panel you mount can see the PinPad, make sure you can reach this high too.
Lastly, whenever you look at the machine then make sure it has a flat or slightly slanted pinpad that a panel can see.
Some ATM developers have wised up and put the PinPads flat, but going up and down. You can avoid these that don’t, but if you have a PinPad overlay then you’ll be fine.
WHAT IS AN ATM SKIMMER?
ATM skimmers are most commonly bezel overlays with readers attached and hidden inside of them. If you look at any ATM you will see the card insert. The card insert itself and the piece housing it is called a bezel.
A bezel overlay is virtually identical except it’s slightly bigger and hollowed out for a card reader to fit inside of it while still looking as though it belongs on the machine.
Inside of the bezel overlay you need to attach a reader. A basic card reader should last 20-30 days nonstop before it dies and store tens-of-thousands of cards. These readers record your track data and store them. You need to physically retrieve them and use a cable to download the information in order to review the track data.
A GSM skimmer serves the same purpose except it sends the track data to a phone number of your choice. This is the preferred method of our vendors these days because you don’t need to go back to the ATM to retrieve and download before getting paid.
SIDENOTE: You should always encrypt your readers in the event anyone else recognizes what it is and tries to steal it or call the authorities which can then examine it further to retrieve the data before calling the bank to inform them. If your device is encrypted then they’ll be left with a useless electronic.
WATCHING: Almost everyone who’s new to this wants to leave it on the machine and walk away and retrieve it in a few hours. We can’t stress this enough –“Do not do this or you will be caught eventually.”
It doesn’t take a rocket scientist to do a stake out and it’s not uncommon for the cops to leave your skimmer on the machine so you believe nobody has found it and they’ll bust you when you retrieve it.
The absolute only case where you can do this is if you don’t plan on returning to the area and you have both a GSM skimmer and a GSM PinPad overlay that you’ve tested beforehand.
Keep in mind, though, that if you leave a skimmer and never retrieve it then it will be found eventually and subsequently end up on the news 9 out of 10 times.
Once it ends up on the news then they’ll advise everyone to watch out for skimmers and you’ll have a more difficult time skimming in that general area because people will become paranoid. So again, don’t do this unless you don’t plan to return to the area in general.
WHAT TO LOOK OUT FOR?
When watching your ATM you need to read people’s body language, so for example if someone starts pulling on it a lot or starts looking up at your panel then this is suspicious.
Most people never look up. Think about the last time you just start gazing up right above you for no apparent reason – it rarely happens.
If someone makes multiple passes by the ATM then that’s suspicious.
If you’re watching your ATM and a car parks across the way (or even by you) and nobody gets out for a long time then that’s suspicious.
Just use common sense. In most of the cases (if you suspect someone has discovered it) it’s best to try to pull it off as quickly as you can, if you can, especially if you don’t have a GSM skimmer.
People don’t generally stick around very long.
It’s also wise to have a handheld police scanner with you and our vendors at cashoutempire.com even place a mini-microphone inside the bezel overlay so if someone suspects it’s a skimmer then they’ll call the number on the machine and/or the police and you can hear them if you have a microphone and you’ll hear the call go out to cops if you have a handheld scanner.
TIMES: Weekends, Saturday nights, Sundays at lunch and dinner will be the most lucrative. Weekdays – 18:00 – 22:00 if the bank closes at 17:00. If it closes at 18:00 (like on Fridays) then we recommend starting at 19:00 always an hour after the bank closes on weekdays.
Banks expect you to do this on a weekend more than a weekday. The reason we recommend starting an hour late is because we’ve been surprised a few times.
Sometimes bank employees will forget something and come back and other times they’ll just stick around chit-chatting. These are your peak times so you should be generating upwards of $3,000 – $5,000 worth of Dumps per hour in a nice rush hour area.
Personally speaking, professional skimmers stick to peak times because they’re taking personal risks by doing this, so they want the most reward for their risk, lets not forget they are professionals and been doing this for years and in some cases decades.
DISGUISES: Right now it’s Corona time so you’re all in luck. Use a sock hat to cover your hair/ears, some sunglasses to cover your eyes/eyebrows, mask because its corona (covid-19) time.
You’re not going to get identified from your forehead. We’ve seen cases in the summer where this isn’t practical you can still put up a proper mask due to corona.
Furthermore you get a professional Hollywood-style mask. Try SPFX or CFX. These masks can run between $800 – $2,000 , but somebody standing next to you can’t tell you’re wearing one.
What you shouldn’t do is just wear a baseball cap and sunglasses. You will get identified by wearing this if you skim in your area because the snapshot from the camera will end up on the news and somebody will identify you.
We’ve seen too many news reports like this, so please take our professional skimming gangs advice and avoid doing it.
Right now is the best time to skim because it’s corona time and you’re easily concealed. Make some cash now, buy some masks, and set yourself up for the rest of the year, we at hack2world.com will buy all your data on very competitive prices.
ALONE VS PARTNER(S): Both have their benefits.
Alone means that nobody in this world knows you’re doing it and if you use common sense you’re nearly impossible to catch.
A partner has their benefit, but only if they’re fully trusted and this is easier said than done, think about when you will stop working with them how likely are they to keep your secret?
This of course is one the infinite amount of questions you should be asking yourself, always have a leverage of some sort over the person you are going to involve and that for your own safety.
Working with someone obviously has its advantages one of the biggest one is that they can look out and if you are using bluetooth (which you should be) under your sockhat they can always tell you if anyone is about to drive up/walk up on you.
This guide was given to us by one of our most prolific skimming gang vendor that provides us with CC data dumps with Track 1 + Track 2 + PIN at hack2world.com
Furthermore we’re going to boldly state that skimming is the most lucrative fraud you can do by yourself. If you have the right equipment and the courage then you can make hundreds of thousands of dollars in untraceable cash in a single year, guaranteed.
The risk of getting caught is somewhat moderate (a little above low in 2023) but if you use common sense, and that’s what we are setting out to address, along with a few tips, so you can stay one step ahead of the authorities, so here it goes:
First and foremost, before you do anything, you need to find the right machine. This machine should be in an area where you can watch it without looking awfully suspicious.
If you don’t have access to pinpad overlays then you’re going to have to use a panel. In this case you’re going to need a machine where the top (usually where the banks logo is) protrudes enough so the pinhole from the panel you mount can see the PinPad, make sure you can reach this high too.
Lastly, whenever you look at the machine then make sure it has a flat or slightly slanted pinpad that a panel can see.
Some ATM developers have wised up and put the PinPads flat, but going up and down. You can avoid these that don’t, but if you have a PinPad overlay then you’ll be fine.
WHAT IS AN ATM SKIMMER?
ATM skimmers are most commonly bezel overlays with readers attached and hidden inside of them. If you look at any ATM you will see the card insert. The card insert itself and the piece housing it is called a bezel.
A bezel overlay is virtually identical except it’s slightly bigger and hollowed out for a card reader to fit inside of it while still looking as though it belongs on the machine.
Inside of the bezel overlay you need to attach a reader. A basic card reader should last 20-30 days nonstop before it dies and store tens-of-thousands of cards. These readers record your track data and store them. You need to physically retrieve them and use a cable to download the information in order to review the track data.
A GSM skimmer serves the same purpose except it sends the track data to a phone number of your choice. This is the preferred method of our vendors these days because you don’t need to go back to the ATM to retrieve and download before getting paid.
SIDENOTE: You should always encrypt your readers in the event anyone else recognizes what it is and tries to steal it or call the authorities which can then examine it further to retrieve the data before calling the bank to inform them. If your device is encrypted then they’ll be left with a useless electronic.
WATCHING: Almost everyone who’s new to this wants to leave it on the machine and walk away and retrieve it in a few hours. We can’t stress this enough –“Do not do this or you will be caught eventually.”
It doesn’t take a rocket scientist to do a stake out and it’s not uncommon for the cops to leave your skimmer on the machine so you believe nobody has found it and they’ll bust you when you retrieve it.
The absolute only case where you can do this is if you don’t plan on returning to the area and you have both a GSM skimmer and a GSM PinPad overlay that you’ve tested beforehand.
Keep in mind, though, that if you leave a skimmer and never retrieve it then it will be found eventually and subsequently end up on the news 9 out of 10 times.
Once it ends up on the news then they’ll advise everyone to watch out for skimmers and you’ll have a more difficult time skimming in that general area because people will become paranoid. So again, don’t do this unless you don’t plan to return to the area in general.
WHAT TO LOOK OUT FOR?
When watching your ATM you need to read people’s body language, so for example if someone starts pulling on it a lot or starts looking up at your panel then this is suspicious.
Most people never look up. Think about the last time you just start gazing up right above you for no apparent reason – it rarely happens.
If someone makes multiple passes by the ATM then that’s suspicious.
If you’re watching your ATM and a car parks across the way (or even by you) and nobody gets out for a long time then that’s suspicious.
Just use common sense. In most of the cases (if you suspect someone has discovered it) it’s best to try to pull it off as quickly as you can, if you can, especially if you don’t have a GSM skimmer.
People don’t generally stick around very long.
It’s also wise to have a handheld police scanner with you and our vendors at cashoutempire.com even place a mini-microphone inside the bezel overlay so if someone suspects it’s a skimmer then they’ll call the number on the machine and/or the police and you can hear them if you have a microphone and you’ll hear the call go out to cops if you have a handheld scanner.
TIMES: Weekends, Saturday nights, Sundays at lunch and dinner will be the most lucrative. Weekdays – 18:00 – 22:00 if the bank closes at 17:00. If it closes at 18:00 (like on Fridays) then we recommend starting at 19:00 always an hour after the bank closes on weekdays.
Banks expect you to do this on a weekend more than a weekday. The reason we recommend starting an hour late is because we’ve been surprised a few times.
Sometimes bank employees will forget something and come back and other times they’ll just stick around chit-chatting. These are your peak times so you should be generating upwards of $3,000 – $5,000 worth of Dumps per hour in a nice rush hour area.
Personally speaking, professional skimmers stick to peak times because they’re taking personal risks by doing this, so they want the most reward for their risk, lets not forget they are professionals and been doing this for years and in some cases decades.
DISGUISES: Right now it’s Corona time so you’re all in luck. Use a sock hat to cover your hair/ears, some sunglasses to cover your eyes/eyebrows, mask because its corona (covid-19) time.
You’re not going to get identified from your forehead. We’ve seen cases in the summer where this isn’t practical you can still put up a proper mask due to corona.
Furthermore you get a professional Hollywood-style mask. Try SPFX or CFX. These masks can run between $800 – $2,000 , but somebody standing next to you can’t tell you’re wearing one.
What you shouldn’t do is just wear a baseball cap and sunglasses. You will get identified by wearing this if you skim in your area because the snapshot from the camera will end up on the news and somebody will identify you.
We’ve seen too many news reports like this, so please take our professional skimming gangs advice and avoid doing it.
Right now is the best time to skim because it’s corona time and you’re easily concealed. Make some cash now, buy some masks, and set yourself up for the rest of the year, we at hack2world.com will buy all your data on very competitive prices.
ALONE VS PARTNER(S): Both have their benefits.
Alone means that nobody in this world knows you’re doing it and if you use common sense you’re nearly impossible to catch.
A partner has their benefit, but only if they’re fully trusted and this is easier said than done, think about when you will stop working with them how likely are they to keep your secret?
This of course is one the infinite amount of questions you should be asking yourself, always have a leverage of some sort over the person you are going to involve and that for your own safety.
Working with someone obviously has its advantages one of the biggest one is that they can look out and if you are using bluetooth (which you should be) under your sockhat they can always tell you if anyone is about to drive up/walk up on you.
